The CI2L is Whirlwind's 2-channel CobraNet line level input module. Use it to convert line level analog audio into professional quality digital audio for distribution over CobraNet digital networks. The CI2L can be temporarily or permanently connected to the CobraNet network, anywhere network access and AC power are available. Connect any line level source such as stereo mixer outputs, computer sound card outputs, or media player outputs and instantly send them throughout the CobraNet digital audio network.

Setup and operation are simple and easy.

Just set the bundle select wheels to the desired transmit bundle number, and set the bitwidth/latency selector to match the bitwidth and latency of the receiving device. Then apply the two channels of audio and adjust the input level as necessary, ensuring that the level is below the 0dB clipping level.

FEATURES

• Uses CobraNet networking protocol compatible with all other CobraNet devices from over 40 manufacturers.
  
• Transmits 20 or 24 bit word length.
  
• Transmits 5.33 ms, 2.66 ms or 1.33 ms latencies.
  
• Inputs can be assigned to multiple channels within the transmit bundle.
  
• Input level control can provide 36 dB of gain or attenuation to the analog input signal.
  
• Front panel LED meters indicate analog signal level.
  
• Integrated universal power supply for 100-250 VAC, 50/60 Hz operation
  
• Integral mounting bracket provides for secure vertical or horizontal orientation or
• mounting to a rack shelf
  
  
  • 
    

  Frequency Response	± .25 dBv 20-20 kHz at unity gain
  Total Harmonic Distortion +noise	< .0022% 20-20 kHz at unity gain
  Dynamic Range	110 dBv at unity gain, 97 dBv at 20 dBv of gain, 101 dBv at 20 dBv of attenuation
  Stereo Separation	< -98 dBv at 20 kHz <-112 dBv at 1 kHz
  Total Gain	36 dBv
  Range of level pot	-36 dBv to + 36 dBv
  Common Mode Rejection of Input	70 dBv 20-20 kHz
  Maximum Input level	+20 dBv
  Input Impedance	20k Ohms balanced
  Noise at various gains	-100 dBv at unity, -87 dBv at 20 dBv of gain, -101 dBv at 20 dBv of attenuation
  Input LED threshold	0 dBfs, -12 dBfs, and –36 dBfs
  Thermals	Convection cooled, 5 to 30°C operating range
  Power consumption	13.3 Watts idle, 17 Watts max
  Power requirements	85-264 VAC, 50 or 60 Hz
  Size	8 1/2” x 5/8” x 6” (WxHxD)
  Unit Weight	3 lbs.
  Internal Mains fuse	Internal self resetting .37 Amp trip current .16 Amps hold current

  Download the manual here.